Roofing films

Roofing films are used to ensure integrity, security and protection design of the roof from the ingress of moisture from the outside, provide exit condensate from the heater out, and provide optimum temperature and moisture conditions inside the premises building structures and insulation. Roof of the film offered in Ukraine under the trademarks: Gidrobarer, Parobarer and Antikondensat.

scheme Specialties pitched roof

Gidrobarer

reinforced podkrovelnaya Vapor permeable film for protection of the attic space from the dust, the penetration of residual water, rain and snow. Thanks microperforation provided ventilation to water vapor, penetrating into the insulation layer of the roof structure. The film does not rot and pests. Used when the device all ventilated sloping roof structures (in complex with metal tile, ceramic tile, evroshiferom, fiber-cement, asbestos and other roofing materials).

Installation gidrobarera:

roofing fastened directly to the film plane of the rafters or other building elements roofing . It uses clips from the installation of mechanical or stainless clout. The distance between the carriers lags should not exceed 1.2 m. The distance between the film and the flooring should be 2-4 cm by the ridge should be provided with a gap of at least 5 cm for ventilation. It should lay the roof film brighter side deposit tape at the edge of the film to the roof covering.

Antikondensat

polypropylene film having on one side antikondensatny layer of nonwoven geotextiles, on the other - waterproofing layer. Due to the textile insert film absorbs the remnants of steam, moisture and promotes their weathered through the ventilation gaps. The advantage of this material is its exceptional strength and stability to the high standard of UV radiation (up to 12 months.). Antikondensat indispensable when the device metal roofing (leaf metal , zinc and copper sheets, etc.). Roof after the installation of such a film may be left without coverage for a longer time than using other podkrovelnyh films. And thanks to its high strength it can withstand the weight of the technician, and a layer of snow in the winter time.

Installation antikondensata:

film mounted absorbent layer of nonwoven geotextiles inside the premises. Minimum clearance under the film should be 4 cm Fixing film in the lower zone roofing and in the ridge must comply conditions necessary for the organization of a current of air, and in the zone of the ridge should remain a gap of at least 10 cm for ventilation. Use this film can be ventilated in any sloping roof structures.

Parobarer

vaportight reinforced protective film for formation of a protective layer from the inside of the insulation space podkrovelnogo pitched and flat roofing , as well as for the formation of vapor tight layer with the inside of the insulation in cases of internal wall insulation neshnih object. Film can be used for both ventilated and unventilated structures in pitched or flat roofs .

Installation parobarera:

film is fixed both horizontally and vertically on the inner side of the insulation. It uses staples or stainless clout. Be sure to glue the film 2-sided adhesive tape that would preserve the expansion joints steam insulating properties of the material. The film may be stacked by either party. Using the film as possible with Fiberglass Products (Isover, Ursa, and others), and with mineral wool (Rockwool, Mizol).