FUGA FRESCA, 0.16 кг.

Полимерная краска для обновления цвета цементных швов на стенах и полах. 

Применение: 

Используется для обновления цвета цементных швов, устранение неровностей цвета заполнителей швов, дефектов и загрязнений, возникающих в результате эксплуатации. 

Fuga Fresca помогает получить обновленный универсальный цвет цементных швов (цветовая гамма Fuga Fresca совпадает с цветовой гаммой заполнителей швов Mapei).Швы, заполнении Fuga Fresca, более водостойкие и легче очищаются от загрязнений. 

Технические данные: 

• Цвет: 26 оттенков. 
• Нанесение:  щеткой или непосредственно из тюбика. 
• Расходы: в зависимости от размера плитки и швов 

Упаковка: 

1 кг канистры; 

160 г тюбики.

Цена на продукцию MAPEI указанна в ЕВРО по курсу НБУ + 2%

FUGOLASTIC,10 кг.

Жидкая полимерная добавка для Keracolor FF и GG. 

Применение: 

Используется в качестве заменителя воды при смешивания цементных заполнителей швов Keracolor FF и GG для обеспечения компактности и износостойкости, а также снижение пористости и водопоглощения данных заполнителей. Особенно подходит для заполнения швов в полах, подверженных значительным нагрузкам: бассейны, террасы, балконы и фасады. 

Внимание: не используйте Fugolastic с Keracolor FF и GG для заполнения швов в полах из терракоты и других пористых поверхностей. 

Заполняя швы в полах из полированного керамогранита, предварительно проверьте уровень чистоты поверхности. 

Технические данные: 

• Fugolastic + Keracolor: Пригодность замеса: 2:00. 
• Удаления остатков с поверхности:  течение 10-20 минут. 
• Возможность хождения: примерно через 24 часа. 
• Полное отверждение: 7-10 дней. 
• Нанесение: фирменный шпатель Mapei или валик. 
• Обработка:  фирменная губка Mapei или тампон Scotch-Brite. 
• Срок хранения: 24 месяца. Защищать от мороза. 
• Расходы: в зависимости от размера швов. 
• Упаковка: 25-10-5 кг канистры;  12 х 1 кг упаковки.

Цена на продукцию MAPEI указанна в ЕВРО по курсу НБУ + 2%

FUGOLASTIC, 25 кг.

Жидкая полимерная добавка для Keracolor FF и GG. 

Применение: 

Используется в качестве заменителя воды при смешивания цементных заполнителей швов Keracolor FF и GG для обеспечения компактности и износостойкости, а также снижение пористости и водопоглощения данных заполнителей. Особенно подходит для заполнения швов в полах, подверженных значительным нагрузкам: бассейны, террасы, балконы и фасады. 

Внимание: не используйте Fugolastic с Keracolor FF и GG для заполнения швов в полах из терракоты и других пористых поверхностей. 

Заполняя швы в полах из полированного керамогранита, предварительно проверьте уровень чистоты поверхности. 

Технические данные: 

• Fugolastic + Keracolor: Пригодность замеса: 2:00. 
• Удаления остатков с поверхности:  течение 10-20 минут. 
• Возможность хождения: примерно через 24 часа. 
• Полное отверждение: 7-10 дней. 
• Нанесение: фирменный шпатель Mapei или валик. 
• Обработка:  фирменная губка Mapei или тампон Scotch-Brite. 
• Срок хранения: 24 месяца. Защищать от мороза. 
• Расходы: в зависимости от размера швов. 
• Упаковка: 25-10-5 кг канистры;  12 х 1 кг упаковки.

Цена на продукцию MAPEI указанна в ЕВРО по курсу НБУ + 2%

FUGOLASTIC, 5 кг.

Жидкая полимерная добавка для Keracolor FF и GG. 

Применение: 

Используется в качестве заменителя воды при смешивания цементных заполнителей швов Keracolor FF и GG для обеспечения компактности и износостойкости, а также снижение пористости и водопоглощения данных заполнителей. Особенно подходит для заполнения швов в полах, подверженных значительным нагрузкам: бассейны, террасы, балконы и фасады. 

Внимание: не используйте Fugolastic с Keracolor FF и GG для заполнения швов в полах из терракоты и других пористых поверхностей. 

Заполняя швы в полах из полированного керамогранита, предварительно проверьте уровень чистоты поверхности. 

Технические данные: 

• Fugolastic + Keracolor: Пригодность замеса: 2:00. 
• Удаления остатков с поверхности:  течение 10-20 минут. 
• Возможность хождения: примерно через 24 часа. 
• Полное отверждение: 7-10 дней. 
• Нанесение: фирменный шпатель Mapei или валик. 
• Обработка:  фирменная губка Mapei или тампон Scotch-Brite. 
• Срок хранения: 24 месяца. Защищать от мороза. 
• Расходы: в зависимости от размера швов. 
• Упаковка: 25-10-5 кг канистры;  12 х 1 кг упаковки.

Цена на продукцию MAPEI указанна в ЕВРО по курсу НБУ + 2%

Клей Kreisel для керамогранита GRES MULTI 105

Клей Kreisel для керамической плитки заводского изготовления в виде сухой смеси связующих, минеральных заполнителей и модифицирующих добавок. После смешивания с водой образует однородную, клеящую массу, предназначенную для нанесения тонким слоем. После затвердевания водо- и морозостойкий. Отличается высокой эластичностью и адгезией.

Эластичный универсальный клей для плитки KREISEL ELASTI MULTI 104

Клей для керамической плитки заводского изготовления в виде сухой смеси связующих, минеральных заполнителей и модифицирующих добавок. После смешивания с водой образует однородную, клеящую массу, предназначенную для нанесения тонким слоем. После затвердевания водо- и морозостойкий. Отличается высокой эластичностью и адгезией, а также широким спектром применения.

Клей для плитки усиленный KREISEL SUPER MULTI 103

Клей для керамической плитки заводского изготовления в виде сухой смеси минеральных связующих, заполнителей и модифицирующих добавок. После смешивания с водой образует однородную, клеящую массу, предназначенную для нанесения тонким слоем. После затвердевания водо- и морозостойкий.

Клей Kreisel для плитки MULTI 102

Клей для керамической плитки заводского изготовления в виде сухой смеси связующих, минеральных заполнителей и модифицирующих добавок. После смешивания с водой образует однородную, клеящую массу, предназначенную для нанесения тонким слоем. После затвердевания водо- и морозостойкий.

Быстросхватывающийся клей для плитки KREISEL SCHNELL-FIX 106

Клей для керамической плитки заводского изготовления в виде сухой смеси связующих, минеральных заполнителей и модифицирующих добавок. После смешивания с водой образует однородную, клеящую массу, предназначенную для нанесения тонким слоем. После затвердевания водо- и морозостойкий. Благодаря быстрому отвердеванию, затирка швов возможна после 3–4 часов с момента укладки плитки.

Клей Kreisel толстослойный для плитки 4-20 мм MAXI MULTI 107

Клей для керамической плитки заводского изготовления в виде сухой смеси связующих, минеральных заполнителей и модифицирующих добавок. После смешивания с водой образует однородную, клеящую массу, предназначенную для нанесения слоем толщиной от 4 до 20 мм. В зависимости от потребности возможно получение пластичной или полужидкой консистенции, облегчающей выравнивание и полное прилегание раствора к плитке. После затвердевания водо- и морозостойкий. Отличается высокой адгезией, эластичностью, позволяет укладывать плитку одновременно с выравниванием неровностей основания.

Клей Kreisel для плитки и калиброванных плит из натурального камня NATURSTEIN KLEBER 108

Клей Kriesel для плитки и калиброванных плит из натурального камня, а также керамической плитки заводского изготовления в виде сухой смеси связующих, минеральных заполнителей и модифицирующих добавок. После затворения водой образует белую, однородную массу. После затвердевания водо- и морозостойкий. Благодаря добавлению траса и других специальных компонентов, клей имеет свойства, предотвращающие изменение окраски камня и появление высолов. Отличается высокой эластичностью, адгезией и широким спектром применения.

Granirapid/A/22.5 WH-Granirapid/komponent A white (C2F/S1)

CLASSIFICATION ACCORDING TO EN 12004 world class

Granirapid represents cement (C) Superior (2) quick-setting (F) grade adhesive S2FS1. Granirapid CE marked in accordance with ITT certificate N ° 85330201 (SFV), published Saurefliesner-Vereingung eVGrossburgwelded Laboratory (Germany) and N ° 25070279/Gi (TUM), 25080057/Gi (TUM) and N ° 25080060/Gi (TUM), issued by the Laboratory of Technical University of Munich (Germany).

SCOPE

Internal and external coating floors and walls with ceramic tiles, any type of stone: marble, natural and artificial stone. Laying rubber coating on the cement foundation (the reverse side with protrusions or mount dovetail ") inside and outside the premises, as well as in areas prone to intense mechanical stress.

Some application

• installing glass and ceramic mosaic tile single and double firing, terracotta floor tiles, ceramic tiles, porcelain unglazed tiles, etc.
• Facing Natural (marble, granite), and artificial stone, with required the use of quick-setting adhesives:
• adhesive and floating cement ties, provided that they are sufficiently conditioned;
• heated floors;
• adhesive and floating cement ties from Mapecem, Mapecem Pronto, Topcem or Topcem Pronto;
• well cleaned and degreased existing floors (ceramic tile, natural stone, mosaic, etc.).

 High strength and speed of the adhesive Granirapid allows for quick tiling or packing operations, if necessary, putting into operation at short notice (department stores, manufacturing, hospitals, airports, etc.).

Granirapid/A/22.5 WH-Granirapid/komponent A white (C2F/S1)

CLASSIFICATION ACCORDING TO EN 12004 world class

Granirapid represents cement (C) Superior (2) quick-setting (F) grade adhesive S2FS1. Granirapid CE marked in accordance with ITT certificate N ° 85330201 (SFV), published Saurefliesner-Vereingung eVGrossburgwelded Laboratory (Germany) and N ° 25070279/Gi (TUM), 25080057/Gi (TUM) and N ° 25080060/Gi (TUM), issued by the Laboratory of Technical University of Munich (Germany).

SCOPE

Internal and external coating floors and walls with ceramic tiles, any type of stone: marble, natural and artificial stone. Laying rubber coating on the cement foundation (the reverse side with protrusions or mount dovetail ") inside and outside the premises, as well as in areas prone to intense mechanical stress.

Some application

• Laying ceramic glass mosaic tile single and double firing, terracotta floor tiles, ceramic tiles, porcelain unglazed tiles, etc.
• Facing Natural (marble, granite), and artificial stone, if necessary the use of quick-setting adhesives:
• adhesive and floating cement ties, provided that they are sufficiently conditioned;
• heated floors;
• adhesive and floating cement ties of Mapecem, Mapecem Pronto, Topcem or Topcem Pronto;
• well cleaned and degreased existing floors (ceramic tile, natural stone, mosaic, etc.).

High strength and speed of the adhesive Granirapid allows for rapid cladding or packing operations, if necessary, putting into operation in a short time (department stores, manufacturing, hospitals, airports, etc.).

Granirapid/A/22.5 WH-Granirapid/komponent A, white (C2F/S1)

KASSIFIKATSIYA world class ACCORDING TO EN 12004

Granirapid represents cement (C) Superior (2) quick-setting (F) grade adhesive S2FS1. Granirapid CE marked in accordance with ITT certificate N ° 85330201 (SFV), published Saurefliesner-Vereingung eVGrossburgwelded Laboratory (Germany) and N ° 25070279/Gi (TUM), 25080057/Gi (TUM) and N ° 25080060/Gi (TUM), issued by the Laboratory of Technical University of Munich (Germany).

SCOPE

Internal and external coating floors and walls with ceramic tiles, any type of stone: marble, natural and artificial stone. Laying rubber coating on the cement foundation (the reverse side with protrusions or mount dovetail ") inside and outside the premises, as well as in areas prone to intense mechanical stress.

Some application

• installing glass and ceramic mosaic tile single and double firing, terracotta floor tiles, ceramic tiles, porcelain unglazed tiles, etc.
• Facing Natural (marble, granite), and artificial stone, with required the use of quick-setting adhesives:
• adhesive and floating cement ties, provided that they are sufficiently conditioned;
• heated floors;
• adhesive and floating cement ties from Mapecem, Mapecem Pronto, Topcem or Topcem Pronto;
• well cleaned and degreased existing floors (ceramic tile, natural stone, mosaic, etc.).

 High strength and speed of the adhesive Granirapid allows for quick tiling or packing operations, if necessary, putting into operation at short notice (department stores, manufacturing, hospitals, airports, etc.).

Isolastic/10-Izolastik

Isolastic an additive for blending with compositions Kerabond T, Kerafloor or Adesilex P10 to improve their performance and flexibility, which leads them into line with requirements of the class C2 (improved adhesive) according to world class EN 12004, as well as class S1 (elastic adhesive) or class S2 (highly elastic adhesive), in accordance with world class EN 12002, depending on use, in its pure form or diluted with water.

SCOPE SYSTEM ISOLASTIC + KERABOND T

Adhesive mounting inside and outside:

• ceramic tiles of any type (double and single fired, unglazed tiles, clinker , Tuscan tiles, glass mosaic, porcelain tiles, etc.);
• natural stone and large-size (more than 30x30 cm) ceramic tiles.

Some application 

• laying ceramic tiles on heated floors;
• outer lining of ceramic tiles and natural stone (facades, swimming pools, balconies and terraces);
• Wall Ceramic tiling of precast concrete (bearing panels, bathrooms, walls of "tunnel" systems);
• laying ceramic tiles on the old floor (covered with ceramic tiles, marble, terrazzo, wood, etc.); 
• laying ceramic tiles on the asphalt screed and the foundation;
• laying ceramic tiles on the deformable base (sheetrock, concrete, asbestos cement and so on).

SYSTEM ISOLASTIC + KERAFLOOR

• Adhesive mounting inside and outside:
• large format ceramic tiles (more than 30x30 cm);
• clinker tiles profiled in the back side of Tuscan tiles, natural stone and other materials requiring adhesive layer thicker than 5 mm;
• ceramic tile on the base, having a roughness of 15 mm.

Some typical cases of application

• laying large format ceramic tiles and stone slabs, including the deformable base (lining the walls, terraces, pools, terraces);
• laying of large-format ceramic tiles on heated floors.

ISOLASTIC, Mix with water in the ratio 1:1 + ADESILEX P10

laying glass or ceramic tiles on a paper substrate or grid on the floor or vertical surfaces inside and outside the premises.

Some typical cases of

• Laying glass and ceramic mosaics on the surface neabsorbiruyuschie (Mapelastic, Mapegum WPS, tile, etc.). 
• installing glass and ceramic mosaics in swimming pools, stores or over the absorbent surfaces.
• Laying glass or ceramic mosaics on the flexible base (plasterboard, cement reinforced base, wooden base, provided that they are well secured).

Isolastic/10-Izolastik

Isolastic an additive for blending with compositions Kerabond T, Kerafloor or Adesilex P10 to improve their performance and flexibility, which leads them into line with requirements of the class C2 (improved adhesive) according to world class EN 12004, as well as class S1 (elastic adhesive) or class S2 (highly elastic adhesive), in accordance with world class EN 12002, depending on use, in its pure form or diluted with water.

SCOPE SYSTEM ISOLASTIC + KERABOND T

Adhesive mounting inside and outside:

• ceramic tiles of any type (double and single fired, unglazed tiles, clinker , Tuscan tiles, glass mosaic, porcelain tiles, etc.);
• natural stone and large-size (more than 30x30 cm) ceramic tiles.

Some application 

• laying ceramic tiles on heated floors;
• outer lining of ceramic tiles and natural stone (facades, swimming pools, balconies and terraces);
• Wall Ceramic tiling of precast concrete (bearing panels, bathrooms, walls of "tunnel" systems);
• laying ceramic tiles on the old floor (covered with ceramic tiles, marble, terrazzo, wood, etc.); 
• laying ceramic tiles on the asphalt screed and the foundation;
• laying ceramic tiles on the deformable base (sheetrock, concrete, asbestos cement and so on).

SYSTEM ISOLASTIC + KERAFLOOR

• Adhesive mounting inside and outside:
• large format ceramic tiles (more than 30x30 cm);
• clinker tiles profiled in the back side of Tuscan tiles, natural stone and other materials requiring adhesive layer thicker than 5 mm;
• ceramic tile on the base, having a roughness of 15 mm.

Some typical cases of application

• laying large format ceramic tiles and stone slabs, including the deformable base (lining the walls, terraces, pools, terraces);
• laying of large-format ceramic tiles on heated floors.

ISOLASTIC, Mix with water in the ratio 1:1 + ADESILEX P10

laying glass or ceramic tiles on a paper substrate or grid on the floor or vertical surfaces inside and outside the premises.

Some typical cases of

• Laying glass and ceramic mosaics on the surface neabsorbiruyuschie (Mapelastic, Mapegum WPS, tile, etc.). 
• installing glass and ceramic mosaics in swimming pools, stores or over the absorbent surfaces.
• Laying glass or ceramic mosaics on the flexible base (plasterboard, cement reinforced base, wooden base, provided that they are well secured).

Isolastic/10-Izolastik

Isolastic an additive for blending with compositions Kerabond T, Kerafloor or Adesilex P10 to improve their performance and flexibility, which leads them into line with requirements of the class C2 (improved adhesive) according to world class EN 12004, as well as class S1 (elastic adhesive) or class S2 (highly elastic adhesive), in accordance with world class EN 12002, depending on use, in its pure form or diluted with water.

SCOPE SYSTEM ISOLASTIC + KERABOND T

Adhesive mounting inside and outside:

• ceramic tiles of any type (double and single fired, unglazed tiles, clinker , Tuscan tiles, glass mosaic, china tiles, etc.);
• natural stone and large-size (more than 30x30 cm) ceramic tiles.

Some application 

• laying ceramic tiles on heated floors;
• outer cladding with ceramic tiles and natural stone (facades, swimming pools, balconies and terraces);
• Wall Ceramic tiling of precast concrete (bearing panels, bathrooms, walls of "tunnel" systems);
• laying ceramic tiles on the old floor (covered with ceramic tiles, marble, terrazzo, wood, etc.); 
• laying ceramic tiles on the asphalt screed and the foundation;
• laying ceramic tiles on the deformable base (sheetrock, concrete, asbestos cement, etc.).

SYSTEM ISOLASTIC + KERAFLOOR

• Adhesive mounting inside and outside:
• large format ceramic tiles (more than 30x30 cm);
• clinker tileswith a profiled rear side of Tuscan tiles, natural stone and other materials requiring adhesive layer thicker than 5 mm;
• ceramic tile on the base, with irregularities up to 15 mm.

Some typical cases of application

• laying large format ceramic tiles and stone slabs, including the deformable base (lining the walls, terraces, pools, terraces);
• laying of large-format ceramic tiles on heated floors.

ISOLASTIC, Mix with water in the ratio 1:1 + ADESILEX P10

laying glass or ceramic tiles on a paper substrate or grid on the floor or vertical surfaces inside and outside the premises.

Some typical cases of

• installing glass and ceramic mosaics on the surface neabsorbiruyuschie (Mapelastic, Mapegum WPS, tile, etc.). 
• installing glass and ceramic mosaics in swimming pools, stores or over the absorbent surfaces.
• Laying glass or ceramic mosaics on the flexible base (plasterboard, cement reinforced base, wooden base, provided that they are well secured).

Kerabond T/25 GR-Kerabond, gray (S1T)

GLUE cement-based tile and insulating materials

NAZNACHEIE

• inner and outer cladding with ceramic tiles and mosaics all floors, walls and ceilings;
• Spot bonding of insulating materials (Styrofoam, polyurethane foam, glass - and mineral wool, Papercrete, insulating panels). 

Typical applications

laying ceramic mosaics on paper or mesh-based, ceramic tiles of red and white clay, unglazed tiles, single and double-fired, ceramic tiles on :

• Conventional lime and cement plaster;
• Conventional concrete slabs and reinforced concrete, provided that they are quite dry and conditioned;

Kerabond T/25 WH-Kerabond, white (S1T)

ADHESIVE cement based ceramic tiles and insulating materials

PURPOSE

• inner and outer facing ceramic tiles and mosaics all floors, walls and ceilings;
• Point bonding insulating material (polystyrene, polyurethane foam, glass - and mineral wool, Papercrete, insulating panels).

Typical applications

laying ceramic tiles on paper or mesh-based, ceramic tiles of red and white clay, unglazed tiles, tap, double-fired, ceramic tiles on:

• Conventional lime and cement plaster;
• normal concrete slabs and reinforced concrete foundation under the condition that they are dry enough and conditioned;

Keraflex/25 GR-Kerafleks, gray (S2TE)

Classification according to EN 12004 Keraflex world class represents a cement adhesive (C) improved type (2), resistant to creep (T) and has a high time maintaining efficiency in the open state (E) class S2TE. Keraflex CE marked in accordance with the certificate ITT N ° 25040476/Gi (TUM), issued by the Laboratory of Technical University of Munich (Germany).

SCOPE

laying indoor and outdoor ceramic tiles , of stone slabs and tiles of any type on floors, walls and ceilings. Clay is also suitable for spot bonding of insulating materials like polystyrene foam, rock wool and glass, hardboard, sound-absorbing panels, etc. Some typical examples of application

• laying ceramic tiles, stone slabs and tiles on top of the following grounds :
• cement plaster.
• inner walls of cellular concrete.
• Gypsum and anhydrite, primed Primer G.
•  Drywall.
• Heated floors.
• cement screed, which should be sufficiently seasoned and dried.
• Painted walls in the premises, provided good adhesion of paint.
• waterproofing membrane made of Mapelastic or Mapegum WPS.
• laying over existing tiling up to 900 cm2.
• pocketbook laying tile in pools and baths.
• Floor laying prone intense stress.

Keraflex/25 WH-Kerafleks, white (S2TE)

Classification according to EN 12004 Keraflex world class represents cement adhesive (C) improved type (2), resistant to creep (T) and with increased time maintaining efficiency in the open state (E) class S2TE. Keraflex CE marked in accordance with the certificate ITT N ° 25040476/Gi (TUM), issued by the Laboratory of Technical University of Munich (Germany).

SCOPE

laying indoor and outdoor ceramic tiles , of stone slabs and tiles of any type on floors, walls and ceilings. Clay is also suitable for spot bonding of insulating materials such as polystyrene foam, mineral wool and glass wool, hardboard, sound-absorbing panels, etc. Some typical examples of application

• laying ceramic tiles, stone slabs and tiles on top of the following grounds :
• cement plaster.
• inner walls of cellular concrete.
• gypsum and anhydrite, primed Primer G.
•  Drywall.
• Heated floors.
• Cement Ties, which must be sufficiently seasoned, and dried.
• Painted walls in the premises provided a reliable seal paint.
• waterproofing membrane made of Mapelastic or Mapegum WPS.
• laying over existing tiling up to 900 cm2.
• pocketbook laying tile in pools and baths.
• Floor laying prone intense stress.

Keralastic/10 WH-Keralastik, white (R2)

two-component high performance polyurethane adhesive for laying ceramic tile and stone materials.

Application:

Keralastic - Superior adhesive resin-based (class R2) for laying ceramic tile, natural stone,mosaics on horizontal and vertical surfaces inside and outside the premises. Suitable for laying on the surface of metal, wood, rubber, PVC, linoleum and tie Mapecem, Topcem and Topcem Pronto. When plotted Keralastic without hollow fiber, we waterproofed surface. Keralastic T (R2T) - thixotropic variety Keralastic for use on vertical surfaces.

Keralastic T/5 WH-Keralastik, White T (R2)

two component high performance polyurethane adhesive for laying ceramic tile and stone materials.

Application:

Keralastic - Superior adhesive resin-based (class R2) for laying ceramic tile, natural stone, mosaics horizontal and vertical surfaces inside and outside the premises. Suitable for laying on the surface of metal, wood, rubber, PVC, linoleum and tie Mapecem, Topcem and Topcem Pronto. When plotted Keralastic without hollow fiber, we waterproofed surface. Keralastic T (R2T ) - thixotropic variety Keralastic for use on vertical surfaces.

Keralastic T/10 WH-Keralastik, White T (R2)

two-component high performance polyurethane adhesive for laying ceramic tile and stone materials.

Keranet/1 Liquido - Keranet, liquid

acid preparation for cleaning ceramic tile. 1 liter.

DESTINATION

KERANET - used for cleaning the internal and external surfaces (including the facades of buildings) of the staining caused by cement, we know a, fading, including dirt and oils.

Typical applications

• Removing cement and lime from the surface of ceramic tiles and mosaics on the walls and floor;
• remove residual cement-containing solutions used the lining with ceramic tiles - glue (KERABOND, etc.) or seam fillers (KERACOLOR FF, ULTRACOLOR)
• Remove efflorescence (the formation of patches of lime, nitrate, etc.) on the ceramic surface and the joints between tiles , concrete, plaster, etc.;
• remove dirt that has accumulated on the surface of building materials on construction sites, for example, tiles, sinks, baths, on products made of anodized aluminum, stainless steel, chrome products, etc.;
• Removal fresh rust stains.

Keranet/5 Liquido-Keranet, liquid

acid drug for cleaning ceramic tile. 5 liters.

PURPOSE

KERANET - used for cleaning the internal and external surfaces (including the facades of buildings) of the staining caused by cement, lime, including dirt and oils.

TYPICAL CASES USE

• Removing cement and lime from the surface of ceramic tiles and mosaics on the walls and floor;
• remove residual cement containing solutions used in the cladding tiles - glue (KERABOND, etc.) or seam fillers (KERACOLOR FF, ULTRACOLOR)
• Remove efflorescence (the formation of spots of lime, nitrate, etc.) on the ceramic surface and the joints between tiles, concrete, plaster, etc.;
• remove dirt that has accumulated on the surface of building materials on construction sites, such as ceramic tiles, sinks, baths, on products made of anodized aluminum, stainless steel, chrome-plated products etc.;
• Removing fresh rust stains.

Kerapoxy 100/10-Kerapoksi (R2T)

Classification according to EN 13888 world class

Kegarohu a reactive filler (R) for joints (G ) Class RG.

CLASSIFICATION UNDER world class "EN 12004"

Kegarohu a reactive adhesive (R) Improved type (2) resistant to creep (T) class RT2.
Kegarohu is CE marked in accordance with the certificate ITT № 25040322/GI (TUM), issued by the Technische UniversitKt MOnchen laboratory (Germany).

SCOPE

filled indoor and outdoor joints in sex and wall coverings made of ceramic and stone. Suitable for acid-fast laying ceramic tiles, natural stone, asbestos cement, concrete and other building materials on top of all the usual bases, used in construction.

Some application

• Grouting floor and wall ceramic tiling in the food industry (dairies, dairies, slaughterhouses, breweries, canning plants and factories producing products alcoholism).
• Grouting wall and floor ceramic tiles on production (the electrical industry, storage facilities , paper mills, etc.), ie everywhere where high mechanical strength and acidity.
• Grouting in swimming pools: especially suitable for bathing in thermal or saline waters.
• Grouting in containers containing chemical corrosive substances ( treatment plants, etc.)
• Grouting between tiles on laboratory benches, work surfaces, kitchens, etc.
• Bonding acid keramichekih tiles (used as an adhesive, this composition meets the requirements R2T-class and world class EN 12004).
• Bonding marble steps and window sills.
• Adhering tiles to the fiberglass swimming pools.
• Bonding special parts tiles.

Kerapoxy 100/5-Kerapoksi (R2T)

Classification according to EN 13888 world class

Kegarohu a reactive filler (R) for joints (G ) Class RG.

Classification according to world class "EN 12004"

Kegarohu a reactive adhesive (R) improved type (2) resistant to creep (T) class RT2.
Kegarohu is CE marked in accordance with the certificate ITT № 25040322/GI (TUM), issued by the Technische UniversitKt MOnchen laboratory (Germany).

APPLICATION

filled indoor and outdoor joints in sex and wall coverings made of ceramic and stone. Suitable for acid-fast laying ceramic tiles, natural stone, asbestos cement, concrete and other building materials on top of all the usual bases, used in construction.

Some application

• Grouting floor and wall ceramic tiling in the food industry (dairies, dairies, slaughterhouses, breweries, canning plants and factories producing products alcoholism).
• Grouting wall and floor ceramic tiles on production (the electrical industry, storage facilities , paper mills, etc.), ie everywhere where high mechanical strength and acidity.
• Grouting in swimming pools: especially suitable for bathrooms with thermal or salt water.
• Grouting in containers containing chemical corrosive substances ( treatment plants, etc.)
• Grouting between tiles on the laboratory benches, worktops kitchens, etc.
• Bonding acid keramichekih tiles (used as an adhesive, this composition meets the requirementsR2T class and world class EN 12004).
• Bonding marble steps and window sills.
• Adhering tiles to the fiberglass swimming pools.
• Bonding special parts tiles.