On burners Oilon

Introduction

Company Oylon produces a wide range of burner equipment, with capacity from 12 to 63000 kW. Depending on the type of fuel burners are: gas, liquid fuel and combined. In the production of burners, special attention is paid to: efficiency, safety and ease of maintenance. All equipment "Oylon" standardized in accordance with EU norms. Also "Oylon manufactures burners, under the rules of various marine classification societies, such as ABS, BV, CCS, DNV, GL, KR, LR, NKK, RINA and RS.

design

All the necessary elements of the burner attached to her body. In the case of aluminum alloy is placed three-phase electric motor which is connected to the fan and fuel pump. In dual fuel burners in the fuel pump has a further three-phase motor. The body is covered with high-temperature resistant paint. The body has a flange on the rotary joints, which allows you to turn the burner to the left or right. For safe operation of rotating flanges equip limit switches. With a turning flange, maintenance of the burner head, nozzles and ignition system can be carried out without dismantling the burner. Head and diffuser are made of stainless steel, can withstand temperatures of 1200 ° C. The flow of air in the head can be adjusted throughout the power range, to achieve optimum combustion parameters. For visual control of the torch in the burner is glazed peephole. In automatic mode, the torch is controlled by the ionization electrode or optical sensor. Choke, located on the suction side of the fan and is powered by a servo motor, automatically regulating the flow of fuel and air in accordance with the required capacity. Automatic control is installed on the burner. The removable lid at the top of the burner facilitates electrical works and maintenance.

operation and installation

burners are used in steam and hot water boilers, radiators and other heating equipment. Burners can be installed horizontally and vertically upwards or vertically downwards. The design of the burner material and protection class are intended for indoor use with a maximum temperature of +50 ° C. Standard height above sea level to 500 meters, for use at other altitudes Oylon can make a separate offer. Protection class IP 20 burners.

Fuel

in different models of burners can use the following fuels:
Models GP:
- natural gas: calorific value of Nu = 9,5 kVt.ch/n.m3 (34,3 MJ/Mr. m3), density p = 0,723 kg/n.m3
Models KP:
- diesel fuel, the viscosity of 4-12 mm2/s, +20 ° C
Models RP:
- fuel oil, viscosity max. 250 mm2/s, +50 ° C
- oil, viscosity max. 450 mm2/s, +50 ° C (heating cartridge in the pump and nozzle)
- oil, viscosity max. 650 mm2/s, +50 ° C (heating cartridge as described above + heating fuel pipeline)
Combined burner GKP and GRP:
- natural gas/diesel fuels, fuel characteristics as the previous models,
- natural gas/oil, fuel characteristics as the previous models.
Also by special request Oylon offers burners for other fuels.

power control methods

Depending on the model can be used the following options for power control:
H - two-
T - three-
M - modulated
Two-and Three-burner equipped with a motorized air dampers, switching time is between power - 5 seconds. Burners operate automatically on the first, second or third degree, depending on the load. Modulating burners are equipped with servo, switching time is - 30 sek/90 °. Servo shaft connected to the valve control of fuel consumption and device management operating point. Modulated burner operates throughout the power range, depending on the load. Burners can be adjusted in accordance with the analysis of flue gases.

gas equipment

Elements of the gas equipment mounted on the burner in accordance with standard EN 676: the two main shutoff valve, pressure switch (min./max.) and an automatic shutoff valve leak test. Other equipment for the gas line comes in addition, by separate order.

F/fuel equipment

At step burners mounted several fuel valves. One of the main valve and one for each nozzle. B modyliryemyh burner valve installed on the fuel line and fuel return line from the nozzle. Fuel control is placed in the fuel return line from the nozzle. Fuel filter installed on the pump suction line.

Precise control of fuel temperature

Models burners series RP and GRP are equipped with electric heater fuel. It manages the electric power regulator, providing a constant temperature of fuel. The constancy of temperature of the fuel ensures optimal combustion conditions.

Control torch

All models are equipped with automatic control system of the torch. As the sensor control of the torch can be used ionization electrode or an ultraviolet detector.

Management System

Burners are equipped with automatic control and protection from emergency situations. All cycles of the burner controls the software relays. In the event of an emergency, automatic turn off the burner. In addition modulated burners use a digital power controller.

Shumogasitel

Regardless of the type of burners, they can be equipped with separate shumogasitelem, which helps further reduce noise.

Optimization pressure losses in the burner head

modulating burner may be additionally equipped with a system to optimize the pressure losses in the burner head. This helps to reduce excessive consumption and improve the parameters of combustion at part load burner. Manufacturer reserves the right to make changes.